How to Paint your Mustang or other Classic Car on a budget
Can you get a good paint job from a low buck paint shop? Yes! Professional paint pros and high dollar restorers may scoff, but it’s very possible to get a good looking, long lasting paint job from a discount paint shop like Earl Scheib or Maaco. It’s not appropriate for every car. I wouldn’t hand them the keys to my Shelby GT500 or ’53 Corvette, but for those on a budget it’s a very good option. The key to a successful budget paint job is to prep the car yourself. Leave nothing to the shop except actually laying down the paint. (note: For purposes of discussion we’ll use a classic Mustang as the example, but this process holds true to really any older car)
Analyze your existing paint
The first step before determining if a budget paint job will work on your Mustang is to assess the current condition of the paint. In many cases you can prep and paint directly over an existing paint job, but only if it’s in solid shape.
Look for any signs of cracking, crazing, bubbling or peeling. This indicates that there’s a problem with the existing paint and it’s not adhering properly to the layer underneath. If this is the case you’ll need to sand through any existing layers of paint, down to solid, stable paint or primer. In some cases you’ll need to get all the way down to bare metal, but doing so increases your labor and costs.
Also, when checking the paint, be realistic and don’t ignore areas just for the sake of convenience. It will cost you more in time and money later. Typically if one area of the paint is cracked or peeling, then the paint on the entire car is suspect. Maybe the rest of the car just hasn’t quite reached that point of decay, but it will shortly. So if you only fix areas that look bad, you’ll likely find that you wasted a paint job when the other areas start to crack or peel in a year or two.
On the other hand, in some cases there are legitimate reasons for one area to be bad even if the rest of the paint is solid. If poor body work or rust repair was done in the past then maybe just that section of paint will need to be removed.
Bubbles in the existing paint are sure indications of rust below. These areas will require extra special attention. As you remove the bubbled paint you’ll inevitably find the cancer goes much further then it appeared on the surface. And unless you cut all the rust out it’s going to come back. There are chemical rust converters on the market, and some do a very good job. But understand that none will probably encapsulate rust forever. Be honest with yourself about how long you expect this paint job to last. If you expect to repaint the car in 5 years and you’re on an extremely tight budget, then rust converters may be the approach to take.
Basically what you’re looking for is a good, solid foundation of existing paint that is stable and still strongly bonded to the car. Many times an original factory paint job, even after decades will meet these criteria.
Do all your own body work
As mentioned earlier, the key to keeping your paint shop costs down is to do as much as possible before you take it to the shop. This includes body work, if you’ve got the skill, or the patience to learn the skill. Bodywork is time consuming. It requires several steps that must be done in the correct order, with the correct curing times in between. Shortcuts here will show up like a sore thumb in your new paint job, so don’t be tempted. If you don’t have the skill to tackle the body work yourself then it’s smarter to let the paint shop do it. Just understand that this raises the cost of your paint job significantly. Good body work takes hours upon hours and having a professional do it can easily exceed the cost of a cheap paint job. the cursed woman painting
If you decide to do your own body work discuss it with the paint shop first. They’ll probably have recommendations on the type of primer you use. Some brands will be more compatible with their primers or color coats. The rule of thumb is to stay within the same brand of paint, both for prep and color. Even the cheapest paint shops typically use a brand name on their intermediate and higher paint jobs. Find out what it is and use the same brand as your primer coat. This will ensure you don’t create adhesion problems for yourself down the road.
Stripping all the chrome
One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won’t be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can’t get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage.
At a minimum you want to remove all the chrome from the car. Take off both front and rear bumpers. If your Mustang has bumperettes that are body color be sure to bring them along so they can get sprayed at the same time as the rest of the car. Remove all rocker, hood and trunk molding. Same for wheel well molding and all emblems. This would be a good time to order some new emblems and attachment hardware. Also spend some time cleaning up all the chrome with #0000 steel wool. Nothing looks worse on a fresh paint job then faded emblems and corroded, cloudy chrome.
Take off the chrome molding around both the windshield and rear window. You can pick up a special tool at your local Mustang shop or by mail order that removes these quickly without scratching paint. Of course your paint is probably not in great shape at the moment, so a large flat screw driver will also do the trick. For some classic cars it makes sense to even remove the windshield, but classic Mustangs have chrome molding that will help cover any slight overspray.